BlackHawk Labs MiniRaQ Bedienungsanleitung PDF herunterladen (Seite 13)



13

‐‐‐‐‐‐‐‐‐90‐091Rev.1Mi niRaQ4GSecureSeries∙InstallationGuide



BH2019  16”x16”x¾”PlywoodInsert 1

BH2020  BrushCoverAccessPlate  2

BH2021  BackplatePouchw/Shelf  1

3. Installation

Installation and Setup

Be sure to follow hardware manufacturer’s recommended procedures for installing

equipment in the MiniRaQ 4G Secure.

Backplate Installation

For Stud Mount

Locate solid studs, 16” on center, before marking top

two locations for pilot holes. Drill .156” holes for #10

coarse screws (supplied) into the backplate slots,

spaced nominally at 16” at the top. Use the integrated

level to locate proper mounting pattern. When level,

tighten the first two screws, and then drill the

remaining locations; a minimum of 10 locations for full

payload rating of 400 pounds.

For Other Approved Surfaces

The same process should be used for installing to

other approved surfaces, using the ½” clearance

holes for toggle bolts into a ¾” plywood-backed wall

or fender washers and concrete tapping screws

(3/16” x 2-1/4” minimum) into cinder block.

2 Post Rack Mount

Designed for use in communication data centers and

telecommunication rooms, 2-Post Open Frame Racks

satisfy basic functional requirements for structuring

cable. The MiniRaQ 4G Secure is integrated with a 2

post rack-mount hole-pattern, which matches

industry standards for ease of installation.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

BlackHawk Labs MiniRaQ Bedienungsanleitung Seite 13